Bellows Lens Hood G-3

Attaches to the front accessory thread of Z series (65mm to 360mm) lenses. Utilizing scissor struts, instead of base rails, this Bellows Lens Hood G-3 provides highly efficient protection against extraneous light. It has 2 inserting slots in the rear for 3 inch square filter (glass, gelatine or plastic). In front, a slot is provided for a 4 inch square size vignetter. Vignetter can adjust up and down within 14mm. Gelatin filter mount is provided. Maximum and minimum extension of bellows: 175mm and 50mm. Accepts popular brand vignetters such as Sailwind and Leon.
Cat. #213-376. Weight: 11.8 oz., 335 g.

Front Hood for G-3

Attaches to Bellows Lens Hood G-3. Using the Front Hood for G-3 along with Bellows Lens Hood G-3 will bring higher vignetting efficiency. With the Front Lens Hood used on the Bellows Lens Hood G-3, it is possible to use 127mm lens or longer focal length lenses, except for 100-200mm zoom lens and 500mm lenses. Front Hood for G-3 has an inserting slot for 4" x 4" square size vignetters such as Sailwind and Leon. Maximum and minimum extension of bellows: 105mm and 25mm.
Cat. #213-377. Weight: 5.1 oz., 145 g.

Zoom Lens Mounting Ring for G-3

Anti-rotation stopper prevents G-3 Hood from rotating when using focusing helicoid of 100~200mm Zoom lens. Ring screws onto front of lens. Double rail attaches to bracket of zoom lens.
Cat. #213-379

Bellows Lens Hood G-2

Attaches to the front accessory thread of Z series (90mm-360mm) lenses; provides optimum shading of the lens to prevent all stray light. Rack & pinion adjustment allows selection of optimal setting by actual preview; width is easily adjusted; incorporates 3" gelatine filter holder. Maximum and minimum extension of bellows: 100mm and 30mm. Supplied with 77mm mounting ring. Can be used on other brand lenses with step down rings.
Cat. #213-375. Weight: 10.2 oz., 290 g.

Gelatine Filter Holder Model 2

Slip-on molded holder for 3 inch gelatin and polyester filters, attaches to 50, 65, 75, 90, 110, 127, 140, 150, 180, 250, 350, and 360mm lenses. Indispensable for accurate color correction. Allows insertion of multiple gelatine or polyester filters. Also accepts 3" plastic filters. Especially useful with 50 and 65mm lenses where threaded filters may cause vignetting.
Cat. #214-452. Weight: 1.6 oz., 45 g.



Sun Shield

This useful device can be attached to lenses in cases where it is not possible to use the regular lens hood. Especially useful with wide angle lenses including 50, 65 and 75mm lenses. Not suitable for 500mm APO or 75mm Shift lenses.
Cat. #213-460. Weight: 4.2 oz., 120 g.